(Q|O)SFP are basically just raw high speed serial interfaces to whatever - you see this a lot in FPGAs, you can use the QSFP interfaces for anything high speed - PCIe, SATA, HDMI…
> Although we can already buy commercial transceiver solutions that allow us to use PCIe devices like GPUs outside of a PC, these use an encapsulating protocol like Thunderbolt rather than straight PCIe.
> [snip]
> As explained in the intro, this doesn’t come without a host of compatibility issues, least of all PCIe device detection, side-channel clocking and for PCIe Gen 3 its equalization training feature that falls flat if you try to send it over an SFP link.
So, uh… what’s the benefit? How much overhead does Thunderbolt really introduce, given it solves these other issues?
I go over it in the video but yes, active thunderbolt is probably a very good choice for a lot of people. I went into another direction for some reasons that are not applicable to everyone:
- Learning : I want to learn about the lower level of PCIe and it's a good project.
- Re-use of cabling : I have a bunch of single mode fiber bundle going around already. You can't find thunderbolt that just have a LC connector ...
- Isolation : Active thunderbolt cable still often have copper for some low speed signals, they don't offer true galvanic isolation
- Avoid dealing with thunderbolt. I want a custom chassis/pcb at one end and chips to convert from TB back to PCIe are not readily available to make custom stuff with ... (not as an individual anyway).
So yeah, if you want a ready to use solution, TB cable is absolutely a good choice, here I'm having some fun, learning in the process and hopefully sharing some of the knowledge.
The benefits are twofold: physical colocation and bandwidth.
Thunderbolt 5 offers 80Gbps of bidirectional bandwidth. PCIe 5.0 16x offers 1024Gbps of bidirectional bandwidth. This matters.
TB5 cables can only get so long whereas fiber can go much farther more easily. This means that in a data center type environment, you could virtualize your GPUs and attach them as necessary, putting them in a separate bank (probably on the same rack).
Active optical (yes!) Thunderbolt cables can be much longer. After all, optical fiber was the original medium for Thunderbolt, back when it was still called alight Peak.
As for bandwidth, the medium transition seems to actually limit the author’s capabilities by losing some of the more advanced link-training features that are necessary for the highest-bandwidth PCIe 3 connections, never mind PCIe 5.
I was looking into the highest bandwidth optical transceivers. 400Gbps were easy enough to find so thanks for posting this. I honestly didn't know there were 1.6Tbps transceivers like this.
One note: I believe the SMF max fiber length is 2km not 1m [1]. The data sheet [2] also says:
The video is about a 2x1 link, which the author hopes to eventually scale up to 3x4 using 40 gig transceivers. I'd say thunderbolt is probably safe in the near future.
Bidirectional is a lot like biweekly. Biweekly depending on context means twice a week or once every two weeks and bidirectional can both mean per direction and total of both directions.
I'm only a single datapoint but I've never encountered that usage. My understanding of a bidirectional link is that it meets the same spec in both directions simultaneously. It's important precisely because many links aren't bidirectional, sharing a single physical link between two logical links.
This was a super interesting video to watch. I honestly thought SFP required more setup, but this explains why AliExpress is so ripe with USB3 and HDMI over SFP converters that are dirt cheap.
It's been amazing having 6 years of fiber optic HDMI & DP monitor connections, that work so so so well. I bought some no name one on Amazon in ~2019 and was flabbergasted it was real & worked.
Such a huge upgrade from the heavy thick 35 ft HDMI<->dvi cable I've used for so long.
Literally the only downside is figuring out how to roll it up, which I still haven't figured out how to do well with the 150ft cable I have.
It was astoundingly cheap too. I think the first one I got was under $60?! No one really knew the segment existed, they just needed to get some sales, I assume. I heard usb3 has been available but they've been bulky & expensive. Where-as the whole fiber optic cable seamlessly integrates the transceiver on mine. I like Cable Matters, they make some fine ones.
So you're saying I can put a handful of 4090's out in the middle of snowy Michigan with a handful of OM4 cables snaking into my basement to run legit arctic cooling with no noise?
Blog post for people who prefer reading: https://hackaday.com/2026/04/11/implementing-pcie-over-fiber...
While at a higher level, thunderbolt and https://en.wikipedia.org/wiki/ExpEther can both of course work over fiber too!
(Q|O)SFP are basically just raw high speed serial interfaces to whatever - you see this a lot in FPGAs, you can use the QSFP interfaces for anything high speed - PCIe, SATA, HDMI…
> Although we can already buy commercial transceiver solutions that allow us to use PCIe devices like GPUs outside of a PC, these use an encapsulating protocol like Thunderbolt rather than straight PCIe.
> [snip]
> As explained in the intro, this doesn’t come without a host of compatibility issues, least of all PCIe device detection, side-channel clocking and for PCIe Gen 3 its equalization training feature that falls flat if you try to send it over an SFP link.
So, uh… what’s the benefit? How much overhead does Thunderbolt really introduce, given it solves these other issues?
I go over it in the video but yes, active thunderbolt is probably a very good choice for a lot of people. I went into another direction for some reasons that are not applicable to everyone:
- Learning : I want to learn about the lower level of PCIe and it's a good project. - Re-use of cabling : I have a bunch of single mode fiber bundle going around already. You can't find thunderbolt that just have a LC connector ... - Isolation : Active thunderbolt cable still often have copper for some low speed signals, they don't offer true galvanic isolation - Avoid dealing with thunderbolt. I want a custom chassis/pcb at one end and chips to convert from TB back to PCIe are not readily available to make custom stuff with ... (not as an individual anyway).
So yeah, if you want a ready to use solution, TB cable is absolutely a good choice, here I'm having some fun, learning in the process and hopefully sharing some of the knowledge.
The benefits are twofold: physical colocation and bandwidth.
Thunderbolt 5 offers 80Gbps of bidirectional bandwidth. PCIe 5.0 16x offers 1024Gbps of bidirectional bandwidth. This matters.
TB5 cables can only get so long whereas fiber can go much farther more easily. This means that in a data center type environment, you could virtualize your GPUs and attach them as necessary, putting them in a separate bank (probably on the same rack).
Active optical (yes!) Thunderbolt cables can be much longer. After all, optical fiber was the original medium for Thunderbolt, back when it was still called alight Peak.
I couldn’t find any optical TB5 cables, but here’s a 4.5m TB4 one: https://www.owc.com/blog/the-new-superlong-40gb-s-owc-active...
And if TB3 is enough, Corning makes them in lengths up to 50m: https://www.corning.com/microsites/coc/oem/documents/ocbc/OE...
As for bandwidth, the medium transition seems to actually limit the author’s capabilities by losing some of the more advanced link-training features that are necessary for the highest-bandwidth PCIe 3 connections, never mind PCIe 5.
"same rack" should still be fine for 1m passive TB5 cable though, right?
> 1024Gbps
Good luck getting a 1Tbit tranceiver. Anydirectional. Also it's 512Gbitish per direction.
Easy, fs.com has 1.6Tbps OSFP for about 570€ - though only up to 1m lenght apparently.
I was looking into the highest bandwidth optical transceivers. 400Gbps were easy enough to find so thanks for posting this. I honestly didn't know there were 1.6Tbps transceivers like this.
One note: I believe the SMF max fiber length is 2km not 1m [1]. The data sheet [2] also says:
> - 2000m max on single mode fiber
[1]: https://www.vitextech.com/products/1-6t-osfp-2fr4
[2]: https://resource.fs.com/mall/resource/cn_osfp-2fr4-16t-data-...
The video is about a 2x1 link, which the author hopes to eventually scale up to 3x4 using 40 gig transceivers. I'd say thunderbolt is probably safe in the near future.
That's 64Gb per lane across x16 lanes. That sounds not daunting?
There's already 800Gb transceivers readily available, 1.6 is probably getting preview deploys to some hyperscalers & other early adopters as we speak.
Bidirectional is a lot like biweekly. Biweekly depending on context means twice a week or once every two weeks and bidirectional can both mean per direction and total of both directions.
But yes I meant 512Gbps each way, to be clear.
I'm only a single datapoint but I've never encountered that usage. My understanding of a bidirectional link is that it meets the same spec in both directions simultaneously. It's important precisely because many links aren't bidirectional, sharing a single physical link between two logical links.
This was a super interesting video to watch. I honestly thought SFP required more setup, but this explains why AliExpress is so ripe with USB3 and HDMI over SFP converters that are dirt cheap.
It's been amazing having 6 years of fiber optic HDMI & DP monitor connections, that work so so so well. I bought some no name one on Amazon in ~2019 and was flabbergasted it was real & worked.
Such a huge upgrade from the heavy thick 35 ft HDMI<->dvi cable I've used for so long.
Literally the only downside is figuring out how to roll it up, which I still haven't figured out how to do well with the 150ft cable I have.
It was astoundingly cheap too. I think the first one I got was under $60?! No one really knew the segment existed, they just needed to get some sales, I assume. I heard usb3 has been available but they've been bulky & expensive. Where-as the whole fiber optic cable seamlessly integrates the transceiver on mine. I like Cable Matters, they make some fine ones.
I love the Neon Genesis background, awesome project too.
The neon genesis background plus this awesome technical breakdown feels so early 2000s.
How does this compare to something like RDMA over Converged Ethernet (RoCE)?
A fun tangent - if someone wants to explore how Azure is performing RDMA over RoCEv2 - check this paper out - https://www.microsoft.com/en-us/research/wp-content/uploads/...
There is an interesting NSDI talk on the paper too - https://www.youtube.com/watch?v=kDJHA7TNtDk (2023)
It seems rather educational.
Cool project! PCIe itself I think is likely to end up doing something similar soon, there are provisions in the spec now for optical retimers.
There's a number of optical modules for TB3 and TB4, might be an easier (but less fun) route as TB3 and TB4 can carry PCIe.
So you're saying I can put a handful of 4090's out in the middle of snowy Michigan with a handful of OM4 cables snaking into my basement to run legit arctic cooling with no noise?
Better yet, keep it inside and save big on heating!
No part of Michigan is in the arctic, but sure, outside of mosquito season, that would work.
Might as well put your entire computer outside and use thunderbolt/usb-4 over fiber docks
Watercooling loop light be better, the radiator fins will still rust from condensation.
I mean yes, but you could also just place the entire computer out there as well